Technovit ® 4006 “HIGH CLEAR” sets standards for transparent cold embedding media in the basic properties that are decisive in materialographic areas of application: transparency, temperature, edge gap, health.
Technovit ® 4006 is a highly transparent 2-component embedding medium based on methyl methacrylate in powder and liquid form. Technovit ® 4006 is used for all embeddings that require transparency, ie the user has to examine the sample through the embedding medium when preparing the sample. The main area of application for this material is therefore in the electronics industry as an aid for target preparation.
Technovit ® 4006 can be used in a variety of ways, thanks to the fast polymerisation time, Technovit ® 4006 is ideally suited for routine work. The mixing ratio can be varied depending on the requirements and required flowability. A ratio of 2:1 is recommended as a basis. The curing time is 11 minutes at 22°C.
transparent: Highly transparent, like looking through a pane of glass, examine your sample during the target preparation! Through the use of high-quality raw materials, Technovit ® guarantees 100% transparency in the Technomat and UV resistance.
Colder: The heat of polymerisation is chemically determined and cannot be eliminated. Technovit ® 4006 is about 10% “colder” compared to other products due to the use of special raw material combinations. Protect your samples!
Low-gap: The integrated adhesion promoter creates a low-gap bond with your sample. The prerequisite for reliable results!
Less Harmful:Due to the product properties that cold embedding materials have to meet, these products must always be processed in accordance with occupational health and safety guidelines. With Technovit ® 4006, however, we have greatly reduced harmful and irritating substances with a new initiator system!